Increase your output. . .
A Cut-Size Carton Labeling System from Lowry automatically applies pressure
sensitive labels to cartons during the paper converting process. The carton
labeler features a roll-on applicator which ensures positive, accurate placement
of labels in excess of 25 cartons per minute. Pressure sensitive labels eliminate
the high-maintenance and safety issues of cold-glue and hot-glue equipment. The
adhesive is already applied to the back of the label and protected by a release liner.
Lowry's Cut-Size Carton Labeling System assures accuracy by utilizing the latest
technologies in our labeling systems. In fact our labelers are manufactured by PARAGON™
Labeling Systems which is owned by Lowry Computer Products. Our carton labeling systems
are the result of our close partnership with the manufacturer as well as our customers.
. . .while decreasing your costs.
A Print and Apply Labeling System can further reduce your costs by reducing your inventory.
Variable information, bar codes and graphics can be printed on-demand from a single stock,
eliminating the cost of product specific label inventory.
Lowry is a solutions oriented integrator of label applicator and data
collection systems, as well as a manufacturer of pressure sensitive labels.
With more than twenty years experience in the pulp & paper industry, we can provide the latest
technology that meets your application needs and exceeds your expectations.
Specifications:
| Cut-Size Carton Labeler |
| Configurations: | | Horizontal |
| Applicator Types: | | Brush-on, Roll-on or air cylinder assisted roll_on |
| Label Width: | | 7.2" (183mm) maximum; 1" (25mm) minimum |
| Label Length: | | 18" (457mm) maximum; 3" (76mm) minimum |
| Supply Roll: | | 12" (305mm) maximum outside diameter on 3" (76mm) standard core |
| Speed: | | Up to 25 labels per minute, depending on label size |
| Accuracy: | | Up to ± 1/16" with consistent labels and controlled carton handling |
| Electronics: | | Microprocessor |
| Motor: | | Stepper (20" per second dispense) |
| electrical | | 115 VAC, 60 cycles, 5amps |
| Product Sensor: | | Photoelectric |
| Label Sensor: | | Photoelectric, clear label sensor optional |
| Label Verification: | | Bar code scanners and luminescence sensors are available to assure
label placement on each carton |
| Indicator: | | Optional warning light may be configured to indicate low media levels |
| Weight: | | 125 lb. (57 kg) without stand; 300 lb. (136 kg) with stand |
| Space Required: | | Single labeler requires three feet of conveyor |
| Air requirements: | | 60-90 PSI, 2cfm, clean, dry, non-oiled |
| Additional Features For Print and Apply Cut-Size Carton Labeler |
| Configuration: | | Zero-que and loop |
| Print Method: | | Direct thermal or thermal transfer |
| Print Speed: | | 2"-12" (51mm-306mm) per second |
| Resolution: | | 203 (8 dots/mm) or 300 dpi (11.8 dots/mm) |
| Print Width: | | 5" (127mm) or 6.6" (168mm) maximum |
| Supply Roll: | | 12" (305mm) maximum outside diameter roll |
| Ribbon Dimensions: | | Up to 5.5"W (140mm) or 7.2"W (183mm) x 2952'L (900m) |
| Fonts: | | Bit-mapped and smooth scaleable fonts |
| Bar Codes: | | All popular symbologies included |
| Electronics: | | Dual 32-bit RISC microprocessors; 4MB RAM |
| Communications: | | RS-232, 422, 485 serial interfaces with DB-25;
high-speed parallel
interface |
| Weight: | | 210 lb. (95 kg) without stand; 385 lb. (175 kg) with stand |
| Address: | | Lowry Computer Products, Inc.
1607 - 9th Street
White Bear Lake, MN 55110 |
| Phone/Fax: | | (651) 429-7722 Fax: (651) 429-6006
(800) 429-7722 Fax: (800) 429-6006 |
| Legal: | | Specifications are subject to change without notice.
All trademarks are the property of their respective owners.
©2002 Lowry Computer Products, Inc. All rights reserved |
View Product Information
